Anping Chongde Wire Mesh Products Co., Ltd. Welcome to your visit 

Ten years  Absorbed Gabion mesh make

Experienced and powerful

Telephone

+8615350535953
You are here: Home  >> News  >> Industry Trends  >> View Details

Product

Company News

Contact Us

Contact:Manager cui

Mobile:+8615350535953

Email:627666641@qq.com

Website:http://www.stonecage.com

Address:Anping County Wire Mesh Industrial Park, Hebei Province

Industry Trends

How is the cage net constructed correctly?

From:Anping Chongde Wire Mesh Products Co., Ltd. Date:2019-08-21 12:03:54Hits:58
1. The staggered seams of the cage net should be arranged in place to avoid longitudinal through seams when installing the cage net;
2. Rise the four sides of the cage net and lock the adjacent edges with the tie line. When tied, tie the tie line around the two overlapping frame lines (when stitching edges) or the twisted edges between the frame line and the cage. Galvanizing damage should be avoided. The pitch is not more than 500 mm.
3. When the stone cage net is installed on the completed bottom network, the tied line is applied to fix the new galvanized stone cage net along the lower border of the newly installed galvanized stone cage net on the bottom network. The same layer of adjacent stone cage net should also be tied to each other to make the galvanized stone cage net connected as a whole.
4. In the construction of the same horizontal layer of a unit project, all the cages should be in place before filling the pebbles. In order to prevent the deformation of the cages, the height difference between the two adjacent cages should not be greater than 35 cm.
5. The preparation work before the installation of the cage net should properly repair the bank slope and the ground before the installation, and keep the original shape of the bank slope as far as possible, but there should be no obvious uplift and depression.
6. The stones filled in the cage can be selected on the river beach, and the compressive strength should meet the design requirements. The pebble size should be between 8 and 20 centimeters, and the reasonable size matching should meet the design requirements of the voids and ensure the straight shape of the cage.
7. After filling the stone inside, the top cover will be covered, and then the overlapping frame wires will be spirally twisted with tie wires; the pitch should not be greater than 50 mm;
8. Fill 10-15 cm humus soil in the top of the masonry stone cage retaining wall for vegetation growth.
After installation, attention should be paid to the later maintenance and repair. According to the requirements of the engineering structure, the types and specifications of the cage mesh can be used, such as: Saikegbin, PVC wrapped cage mesh, Galvanized cage mesh and so on.

Industry Trends

Product

AOL
Telephone

Mobile:+8615350535953

Wechat
AOL